BVJHR - REPRO CHEM, 3800 SYSTEM TONER, 1162201
- MSDS: BVJHR
- Manufacturer: IBM CORP
- Product Name: REPRO CHEM, 3800 SYSTEM TONER, 1162201
- National Stock Number: 6850-00N050048
Product Identification
Product ID:REPRO CHEM, 3800 SYSTEM TONER, 1162201
MSDS Date:01/09/1987
FSC:6850
NIIN:00N050048
MSDS Number: BVJHR
Responsible Party
ARMONK, NY 10504
US
Emergency Phone: 800-426-4333
Info Phone: 800-426-4333
Cage: 7N876
Contractor
Telephone: 800-426-4333/FAX 214-280-3903
Cage: 30874
Ingredients
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 11%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
POLY(2-PROPYL-M-DIOXANE-4,6-DIYLENE); (POLYVINYL BUTYRAL
CAS: 63148-65-2
RTECS: TR4955000
Fraction By Weight: 5%
OSHA PEL N/K
ACGIH TLV: N/K
STYRENE ACRYLIC COPOLYMER
OSHA PEL N/K
ACGIH TLV: N/K
MODIFIED MALEIC RESIN ESTER
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NONE KNOWN. CHRONIC: CONTACT
SKIN RASH MAY OCCUR RARELY.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) . EYES:
FLUSH COPIOUSLY WITH WATER FOR AT LEAST 15 MINUTES. SKIN: WASH AFFE
CTED AREA WITH SOAP AND WATER.
Fire Fighting
Flash Point:914F,490C
Lower Limits:0.2%
Extinguishing Media:WATER, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . FIRE MAY PRODUCE HAZARDOUS DECOMPOSITION
PRODUCTS SUCH AS CARBON, CARBON MONOXIDE.
Unusual Fire/Explosion Hazard:LIKE MANY FINELY DIVIDED MATERIALS, TONER
DUST, IN HIGH CONCENTRATIONS, CAN FORM AN EXPLOSIVE MIXTURE IN AIR
WHICH, IF IGNITED, COULD RESULT IN DUST EXPLOSION.
Accidental Release
Spill Release Procedures:EXERCISE CARE TO NOT SLIP ON THE SMALL STEEL
SHOT. CLEAN-UP CAN BE PERFORMED WITH A VACUUM CLEAN AND/OR BROOM.
IF AVAILABLE, A MAGNET MAY
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID EXCESSIVE HEAT DURING STORAGE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:FOR EMERGENCY USE WEAR NIOSH/MSHA APPROVED
SELF-CONTAINED BREATHING APPARATUS.
Ventilation:NONE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:151F,66C
Spec Gravity:0.9 (H*2O=1)
Appearance and Odor:BLACK, POWDERY POLYMERIC MATERIAL; NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.